AIC RSC 4ET WITH 1200W Redundant PSU
Only 1 left in stock
• 12Gb/s SAS expander chip on backplane
• Specially designed hot swap and low power consumption fans minimize rotational vibration and provide superior cooling
• 3.5” drive tray comes with 4 screw holes to adapt to 2.5” drive
• Comes with a redundant PSU 80+ Platinum
• Two front access USB 3.0 ports
₹198,000 ₹250,000
Only 1 left in stock
RSC-4ET is a T series 4U 24-bay SAS/SATA storage server chassis. With its tool-less 3.5″ and 2.5″ hard drive carriers, top covers and backplane, the RSC-4ET supports quick installation and easy maintenance. This tool-less design solution also features 3 x hot swap fans designed to minimize rotational vibration and SPGC pre-plated steel with minimal paint, offering a cost-effective solution ideally suited for a broad range of applications.
| Weight | 37 kg |
|---|---|
| Dimensions | 68 × 43 × 17.43 cm |
| Brand | AIC |
| Industry Standard | EIA-RS310D |
| Cooling | Middle: 3 x 120x25mm PWM hot swap fans |
| Power Supply | 1200W 1+1 redundant PSU 80+ Platinum |
| Expansion Slot | 7 Full Height |
| Front Panel | System power on/off, System reset and 2 x USB 3.0 ports |
| System Board | 12”(W) x 13”(D) E-ATX/SSI EEB 3.6 compliant MB |
| Drive Bays | • External: 24 x 3.5” hot swap |
| Warranty | 2 Years on Power Supply |
Based on 0 reviews
Be the first to review “AIC RSC 4ET WITH 1200W Redundant PSU”
You must be logged in to post a review.
Related products
-
2U, Rackmount Chassis
AIC RMC 2R WITH 500W POWER SUPPLY
Front bezel for data security and protection
Four(4) external 5.25-inch bay supported
One(1) external 3.5-inch bay supported
Front access dual USB port
Power on/off, system reset and LEDs for HDD & LAN
PS/2 size power supply
Four(4) internal 3.5-inch HDD supported
Three(3) hot-swap middle fans for optimized cooling
Riser card mounting bracket
One(1) rear fan for optimized cooling
Three(3) PCI slots via riser card
*AVAILABLE WITH HIGHER POWER SUPPLY TOO (CALL FOR PRICE)!
SKU: AICRMC2R -
3U, Rackmount Chassis
AIC RSC 3ET WITH 800W Redundant PSU
• 12Gb/s SAS expander chip on backplane
• Specially designed hot swap and low power consumption fans minimize rotational vibration and provide superior cooling
• 3.5” drive tray comes with 4 screw holes to adapt to 2.5” drive
• Comes with a redundant PSU 80+ Platinum
• Two front access USB 3.0 portsSKU: AICRSC3ET -
2U, Rackmount Chassis
AIC RSC 2EC WITH 500W Redundant PSU
Front bezel with lock for data security and protection
Twelve(12) external 3.5-inch hot-swap HDD supported
Power distribution board simplifies cabling and enhances cooling
Single or dual SAS expander:
Vitesse VSC7153 24-PHY SAS 3.0
Five(5) easy-swap middle fans for optimized cooling
Riser card mounting bracket
Hot-swap redundant power supply (1+1 module) maximizes
server protection
Rear access power supply alarm reset
SKU: AICRSC2EC
There are no reviews yet.