AIC RSC 3EC WITH 800W Redundant PSU
In stock
Front bezel for data security and protection
One(1) external slim floppy drive supported
Power on/off, system reset and LEDs for HDD & LAN
Front access USB port & serial console
Sixteen(16) external 3.5-inch hot-swap HDD supported
SAS expander: Vitesse VSC7153 24-PHY SAS 3.0
Five(5) hot-swap middle fans for optimized cooling
One(1) internal 3.5-inch HDD or two(2) internal 2.5-inch HDD
supported
Hot-swap redundant power supply (2+1 module) maximizes
server protection
Two(2) easy-swap rear fan for optimized cooling
Seven(7) PCI slots attribute to network expansion and scalability
₹81,000 ₹100,000
In stock
RSC-3ET is a T series 3U 16-bay SAS/SATA storage server chassis. With its tool-less 3.5″ and 2.5″ hard drive carriers, top covers and backplane, the RSC-3ET supports quick installation and easy maintenance. This tool-less design solution also features 3 x low-power consumption hot swap fans and SPGC pre-plated steel with minimal paint, offering a cost-effective solution ideally suited for a broad range of applications.
| Weight | 22.5 kg |
|---|---|
| Dimensions | 67.5 × 48.2 × 13.25 cm |
| Brand | AIC |
| Industry Standard | EIA-RS310D |
| Cooling | Middle: 5 x 60x38mm hot-swap fans Rear: 2 x 60x38mm easy-swap fans |
| Power Supply | 800W 2+1 hot-swap redundant PFC |
| Expansion Slot | 7 x PCI slots (full height, full length) |
| System Board | Up to 12”(W) x 13”(D) E-ATX/SSI EEB 3.6 compliant motherboard |
| Drive Bays | External : 16 x 3.5” hot-swap, Internal : 1 x 3.5” or 2 x 2.5" HDD Bays + 1 x 2.5" HDD Bay |
| Warranty | 2 Years on Power Supply |
Based on 0 reviews
Be the first to review “AIC RSC 3EC WITH 800W Redundant PSU”
You must be logged in to post a review.
Related products
-
4U, Rackmount Chassis
AIC RSC 4H1 60 BAY RACK CHASSIS WITH 1200W RPS
Key Features
• High-density storage server chassis
• Tool-less design for easy maintenance
– Tool-less top cover
– Tool-less drive backplane sliding mechanism
• 60 tool-less top-loading 3.5” drive trays with built-in light pipe for drive status LED
• Hot-swap cooling fans and 80+ redundant power supply
• Supports up to 2/4/6/8 x 2.5” hot swap drives for OS
• Flexible Motherboard plate design for E-ATX form factor in the marketSKU: AICRSC-4H1 -
3U, Rackmount Chassis
AIC RMC 3F WITH 500W POWER SUPPLY
• Front access dual USB ports
• 3 x middle fans + 2 x easy swap rear fans for optimized cooling – (up to 6 fans)
• Supports single or redundant power supply
• Rear access power supply alarm reset button.*AVAILABLE WITH HIGHER POWER SUPPLY TOO (CALL FOR PRICE)!
SKU: AICRMC3F -
2U, Rackmount Chassis
AIC RMC 2R WITH 500W POWER SUPPLY
Front bezel for data security and protection
Four(4) external 5.25-inch bay supported
One(1) external 3.5-inch bay supported
Front access dual USB port
Power on/off, system reset and LEDs for HDD & LAN
PS/2 size power supply
Four(4) internal 3.5-inch HDD supported
Three(3) hot-swap middle fans for optimized cooling
Riser card mounting bracket
One(1) rear fan for optimized cooling
Three(3) PCI slots via riser card
*AVAILABLE WITH HIGHER POWER SUPPLY TOO (CALL FOR PRICE)!
SKU: AICRMC2R -
3U, Rackmount Chassis
AIC RSC 3ET WITH 800W Redundant PSU
• 12Gb/s SAS expander chip on backplane
• Specially designed hot swap and low power consumption fans minimize rotational vibration and provide superior cooling
• 3.5” drive tray comes with 4 screw holes to adapt to 2.5” drive
• Comes with a redundant PSU 80+ Platinum
• Two front access USB 3.0 portsSKU: AICRSC3ET
There are no reviews yet.